2.75" OD X 36" Long

2.75" OD X 36" LongStandard aluminum intake tubing. 6063T52 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.

This reducing insert adapts a 4" ID intake hose to a 3-1/2" OD tube

This reducing 90-degree intake elbow can be used where you are connecting a 3-1/2" OD tube and a 3" OD tube

This 3" silicone coupler is 6 inches long

If you have the room

Can be used in any vehicle-manufacturer-approved application

This is the outside dimension of standard 6" water pipe

align the clamp while holding in place

This 45 degree silicone elbow is 2-1/4" ID it handles 350 F continuous and is perfect for intercooler/aftercooler applications

This 2" OD carbon fiber elbow is used in air intake systems

Recommended clamps are 94100-0550 on the small end and 94100-0750 on the big end

Special tight-weave aramid reinforcement can handle more pressure and lass longer than other brands

Perfect for air-to-air aftercooler systems