GROCO 2" Engine Flush Kit Adaptor [SSC-2000]

GROCO 2" Engine Flush Kit Adaptor [SSC-2000]2" Engine Flush Kit & Adaptor The Concept A simple quarter turn quick release plug can add safety and flexibility to any water system. Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing. In an Emergency While the connected engine is running, close the seacock and remove the quick release plug. Excess bilge water will be pumped overboard by the engine's raw water pump.

Mounting Hole: Accept #6 x 7/8" Screws

Over-temperature protection and power derating when the temperature is high

Superior flexibility and adhesion to fiberglass

DC 8 Position CLB Square

The intelligent Load output function prevents damage caused by running batteries 'flat'

Positions: 11

Non-Metallic Strainer Cap Fits ARG-1500 & Larger

406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints

Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the battery voltage drops below the preset level

The forward voltage from the galvanic isolator is higher than the potential difference between metals

Flat Cable

Press on insulating cover attaches to studs and allows unobstructed wire access