2.5" ID X 3" Long - Gloss Black

2.5" ID X 3" Long - Gloss BlackThis silicone reducing hump hose is ideal in applications where you need a little "flex", such as between the air cleaner and the engine, or between the engine and the charge air cooler. Temp rated to 350F. Our silicone hump hoses have radiused corners inside the hose at the hump, for less turbulence. No sharp edges inside the hose. Temp rated to 350F. Recommended clamps are 94100 0288.

This 7 inch hump hose is used to connect two 7" OD intake tubes

7/8" Internal Material (Core) Synthetic Rubber (CPE) External Material (Overbraid) Stainless Steel - 303/304 External Material (Outer) Nylon Braid (Black) Minimum Temperature -40°C

Recommended clamps are 94100-0450 on the small end and 94100-0500 on the big end

7 BAR Minimum Bend Radius (90°) 60mm

This 90 degree silicone elbow is 4" ID on one end and 3-1/2" ID on the other and can be used any place you need a reducing 90-degree bend

This is the turbo-to-breather housing silicone hose

Very attractive appearance

About 1 to 1-1/4 inches on each end goes inside an intake hose (minimum 1 inch)

Recommended clamps are 94100-0400 on the small end and 94100-0450 on the big end

-6 Internal Diameter 8mm

Recommended clamp is 9424H

60 degree mandrel bend