Mash Colander Stainless Steel Lifting Cables

Mash Colander Stainless Steel Lifting CablesThese stainless steel cables with quick connects attach to the Small, Medium and Large Mash Colander and a lifting hook for easily removing the Colander once mashing is complete. Please note: cables are rated for 200lb maximum load lift at slow lift speed (ie. <4m 12' per minute). They should not be used for any other use other than lifting the Large (or smaller) BREWHA Mash Colander. They should be strength tested before brewing use by lifting 1. 25

Sanitary fittings and valves for building out your heat exchanger connections

Tip: Brewer Randy Calley of James Calley Brewing Co in Sapulpa

you achieve perfect heat sanitation in the vessel without the use of toxic chemicals

Use an unrestricted inlet: always keep the inlet/supply side fully open and free flowing

Reinforced side banding for extra strength

the serving pressure should be increased to about 35psi to balance the reduced solubility of gas at that temperature

all it takes is jiggling the valve a few times or repeating the steps a couple times before the hops all drop into the tank

This process is ideal for both small-scale and commercial kombucha production

9500 watt at 240V

The false bottom in the BREWHA Microbrewery system is made of wedge wire (inverted triangular wire that allows grain particles that do manage to get through the

They can be purchased with tubes and connectors only (if you already have couplers) or also with the stainless Sanke D couplers

saving you space